VII
History of revision
Date Instruction manual No. Details of revised point
Oct. 2001 DRW. NO.EN294−1143
Version ROM Ver. 1.000 or later
Jun. 2002 DRW. NO.EN294−1143-A
Due to ECN No.FN02−02066
− Change −
Wiring instruction seal affixation is changed right, and the
outline drawing is also changed.
− Additional −
8−2., 13−3. Add F−87
Sept. 2004 DRW. NO.EN294−1143-B
Due to ECN No.FN04−02111
− Change −
7−14. “The backup time is over ten years.” has
changed to “The backup time is about ten years.”
Apr. 2005 DRW. NO.EN294−1143-C
Due to ECN No.FN05−02035
− Addition −
At the warning column in the wiring section, the clause of “
As there is a case which standard wiring color is different,
please confirm the inspection data sheet of the load cell
being used.” is added.
Aug. 2005 DRW. NO.EN294−1143-D
Due to ECN No.FN05−02085
− Correction −
11−8. General specifications
Outline dimensions from “208 mm x 67 mm x 143 mm”
to “208 mm x 67 mm x 140.7 mm”
Jan. 2010 DRW.No.EN294-1143-E
Due to ECN No.FN10−02013
ROM Ver. 1.800 or later
− Addition −
8−2., 13−3. Add F−84
Feb. 2010 DRW.No.EN294-1143-F
Due to ECN No.FN10−02013A
− Addition −
8−2. F−84 “Restriction and warning” is added.
May. 2010 DRW.No.EN294-1143-G
Due to ECN No.FN10−02058B
− Addition −
7−3−1. Analog filter
7−7. Detection of stability
7−7−1. Range to detect stability
7−7−2. Time to detect stability
Due to ECN No.FN10−02026B
− Change −
Front cover logo is changed.
Oct. 2010 DRW.No.EN294-1143-H
Due to ECN No.FN10−02140
− Change −
MInebea logo is changed.
To Next Page
Loading...
