28
CONTENTS
Volume Adjust changes the loudness of all
detector audio, including detection signals, the
threshold tone, and confirmation tones�
Volume Adjust changes are global�
The Volume Adjust setting has a range from
0 (Off/muted) to 25 with a default setting of 20�
ADJUST THE VOLUME
1. Press the Settings button to navigate to the Volume
Adjust setting�
2. Use the Minus (–) or Plus (+) buttons to decrease or
increase the volume to a comfortable level, making sure
that loud signals (close or large targets) do not hurt
your ears�
Volume Adjust
To Next Page
Loading...
