34
CONTENTS
This Advanced Setting allows you to adjust the
pitch of target responses for specific types
of targets� This makes it easier to hear your
preferred targets�
The pitch of each Tone Region can be adjusted� This may be
useful to help differentiate between common targets with
similar Target IDs�
The Tone Pitch setting has a range from 1 to 25�
Tone Pitch adjustment is local; only the current Search Mode
Profile is affected by changes to this Advanced Setting�
EQUINOX 700 allows only the first Tone Pitch to be adjusted�
EQUINOX 900 allows all Tone Pitches to be adjusted�
Tone Pitch is not available for Gold* Mode, or when
the selected Search Mode is using the Depth (dP)
Target Tone setting�
Before adjusting Tone Pitch, select your preferred
Target Tones setting (page 33)�
This is because changes to Tone Pitch only apply to
the active Target Tone setting�
ADJUST TONE PITCH — 1, 2, OR 5 TONES
1. Press the Settings button to navigate to the
Target Tone setting�
2. Long-press (2 seconds) the Settings button to select
the Tone Pitch Advanced Setting�
(2 Seconds)
3. The Frequency Display will indicate the Tone Region
that is currently selected (e�g� t1) and the Tone Region
segments on the Discrimination Scale will be On� Press
the Minus (–) or Plus (+) buttons to adjust the volume of
the selected Tone Region�
Press Plus (+) to set the Target Tone to a higher pitch�
Press Minus (–) to set the Target Tone to a lower pitch�
4. To advance to adjusting the pitch of the next Tone
Region (i�e� t2), press the Accept/Reject button�
Note: if the Target Tone setting is set to 1, there will
only be 1 Tone Region (t1)�
Tone Pitch (Advanced Setting)
* EQUINOX 900 only
To Next Page
Loading...
