EasyManua.ls Logo

Minelab EQUINOX 800 - Page 68

Minelab EQUINOX 800
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
COMPLIANCE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
Information to the User (FCC Part 15.105)
NOTE: Class B Devices
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for
help
Bluetooth® aptX™ Low Latency
The EQUINOX detector makes use of the Bluetooth® aptX™ Low
Latency protocol for audio compression to deliver a superior
wireless audio experience.
DISCLAIMER
The Minelab metal detector discussed in this instruction manual
has been expressly designed and manufactured as a quality metal
detector and is recommended for treasure and gold detecting
in non-hazardous environments. This metal detector has not
been designed for use as a mine detector or as a live munitions
detection tool.
PLEASE NOTE
Since there may be a variety of options available for this detector,
equipment may vary according to the Model or items ordered
with your detector. Certain descriptions and illustrations may also
differ (in this manual) from the exact Model that you purchased.
In addition, Minelab reserves the right to respond to ongoing
technical progress by introducing changes in design, equipment
and technical features at any time.
Minelab®, EQUINOX®, Multi-IQ®, Wi-Stream™, 5F×8™ and 3F×3™ are
trademarks of Minelab Electronics Pty. Ltd.
The Bluetooth® word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by
Minelab is under license.
Qualcomm® aptX™ is a product of Qualcomm Technologies
International, Ltd.
This work is licensed under the Creative Commons Attribution-
NonCommercialNoDerivatives 4.0 International License.
To view a copy of this license, visit:
http://creativecommons.org/licenses/by-nc-nd/4.0/
© MINELAB ELECTRONICS PTY LTD.
4901-0249-1
CAUTION:
Before assembling, charging, or using your detector for the first time, please read the important legal and safety information in this
manual.
Use of this appliance by children aged less than 8 years is prohibited.
This appliance can be used by children aged from 8 years and above and by persons with reduced physical or mental capabilities if
they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Cleaning and user maintenance shall not be made by children without supervision.
68

Other manuals for Minelab EQUINOX 800

Related product manuals