7
CONTENTS
Controls
1. Charge Status LED
Shows the charge status of the detector battery
(page 47)�
2. Power
Turns the detector On/Off�
Long-press (7 seconds) from Off to restore
factory settings (page 60)�
3. Backlight
Selects the Backlight brightness (page 20)�
Long-press (2 seconds) to turn the
Flashlight On/Off (page 20)�
4. Search Mode
Selects the next available Search Mode (page 9)�
Long-press (5 seconds) to reset the current Search
Mode Profile's local settings to their factory presets
(page 9)�
5. All Metal
Toggles between the current discrimination pattern and
All Metal to accept all targets (page 36)�
6. Pinpoint/Detect
Press from the Settings Menu to return to the
Detect Screen�
Press from the Detect Screen to activate Pinpoint
(page 42)� Press again to deactivate Pinpoint�
7. Frequency
Scroll through the available frequencies (kHz):
4, 5, 10, 15, 20*, 40* and Multi (page 17)�
8. Accept/Reject
Accepts or Rejects targets by turning On/Off individual
Discrimination Segments (page 36)�
Use to create discrimination patterns (page 36) and to
adjust Tone Regions* via the Settings Menu�
9. Minus/Plus
Press when in the Detect Screen to adjust the Sensitivity
level (page 18)�
Press when in the Settings Menu to adjust the value of the
selected setting�
10. Settings
Press to access and scroll through the Settings Menu�
Long-press (2 seconds) from the Settings Menu to access
Advanced Settings where available�
11. User Profile*
Press to turn the saved User Profile On/Off (page 22)�
Long-press (2 seconds) to store the current Search Mode
settings to the Custom Search Mode (page 22)�
12. Wireless Audio
Turns Wireless Audio On/Off (page 45)�
Long-press (2 seconds) to initiate Wireless pairing mode to
connect new headphones (page 45)�
1
2
3
11*
10
9
8
7
12
4
5
6
* EQUINOX 900 only
To Next Page
Loading...
