Minelab EQUINOX 900 - Introduction to Search Modes; Choosing the Right Search Mode

To Next Page

To Previous Page

CONTENTS

Introduction to Search Modes

CHOOSING THE RIGHT SEARCH MODE

The EQUINOX 700 and 900 have preset Search Modes that have unique target separation and depth abilities� Choosing

the right Search Mode is important to get the best performance for the environment you are detecting in�

Each mode represents a common detecting use: Park, Field, Beach, and Gold*� Each Search Mode has two Profiles,

uniquely pre-configured to optimise the detector for the best performance in the conditions typical to that location� Each

of the Profiles can be modified and saved�

Select a Search Mode and Proﬁle

Press the Search Mode button to select the next Search Mode�

Choose the Search Mode that best matches your detecting location — Park, Field, Beach, or Gold*�

To further optimise the preset detector settings, choose the best Search Profile for your detecting conditions:

 Search Profile 1 is suitable for general conditions�

 Search Profile 2 is optimised for more difficult conditions� Target sensitivity is enhanced, but extra noise may also

result�

1. Press the Search Mode button to navigate to the Profile

you want to reset�

2. Press-and-hold the Search Mode button until 'SP'

appears on the Target ID Display�

'SP' will appear on the Target ID Display

when a Search Mode Proﬁle is reset�

Park

Great for high-trash

recreational areas, including

most general detecting�

Other manuals for Minelab EQUINOX 900