Recharging
1.) When your Watch DVR's battery begins to get low, the blow indicator
light will flash rapidly, indicating that it needs to be recharged. To charge
the device, simply connect it to your PC exactly the same as you do when
you are accessing the data on the device.
2.) While the Watch DVR is charging, the indicator light will slowly flash.
Upon completely charging the blue indicator light will turn off, indicating a
full charge.
Resetting the Watch DVR
If your Watch DVR stops responding, or if the computer does not
automatically recognize the device when it is on, please take a pin or other
small object and insert it into the reset button hole, pressing the button inside
down gently. This will reboot the device and should return it to a proper
functioning state.
To Previous Page
Loading...