Need help?Do you have a question about the Mini Jumbotron MICROTRON and is the answer not in the manual?
Assemble the Quad TV Mounting System using the manual before attaching TVs to the base.
Place the Jumbotron base on a flat, protected surface to prevent scratches during assembly.
Insert and securely tighten the quad mount pole into the base flange to prevent rotation.
Mount TVs centered on the base, ensuring correct angle and velcro connection for plexi-glass.
Place the frame's center flange over the quad pole; ensure the rubber seal sits flat on all TVs.
Connect the four bungee cords between the frame and the base corners, exercising caution.
Tighten flange screws carefully, avoiding over-tightening to prevent gaps or crookedness.
Attach plexi-glass graphics and tighten TV mounts. Address light gaps with foam seal strips.
Secure ceiling mount, attach pole to mount, raise frame, re-attach base/bungees, install LEDs, attach graphics.
General| Brand | Mini Jumbotron |
|---|---|
| Model | MICROTRON |
| Category | TV Mount |
| Language | English |
To Next Page