40
WIND DEFLECTOR*
Folding up
3. Slide the securing pins on the other side
into the designated openings and
engage them
4. Fold up the upper half of the wind
deflector.
When the wind deflector is installed,
do not incline the seat backrests too
far toward the rear if the seats are to be
moved back into their end positions, or the
wind deflector could be damaged.<
Removal
Release the catch on the attachment han-
dle. To do so, turn the handle slightly for-
ward and push it back. Then follow the
steps for installing the wind deflector in
reverse order.
Folding together
To unlock, push the handle of securing pin
1 on the side into its rear-most position.
Online Edition for Part-No. 01 41 0 158 427 - © 07/04 BMW AG
To Next Page
Loading...
