1
3
GB
INSTALLATION MANUAL
You will need the following tools for
assembly: (The tools are not part of
the scope of delivery)
1. Open-jawed spanner 10 mm
2. Allen key 5 mm
NOTE!
Floating axle WUTSCH
Remove the washer (!) from the transportation
lock by loosening the screw connection.
Slide the steering tube onto the fork shaft, until
it reaches the stop. Make sure that the steering
head is aligned correctly (!) Add the washer.
Slide the handlebar all the way onto the fork
shaft, and tighten the screw. Align the slot in
the handlebar with the rear (!) Firmly press
down on the spherical cap until it snaps into
position.
Attach the seat to the frame and screw on.
This serves stable and secure cornering,
and therefore needs to be mobile
bda_mini_wutsch_210x148.indd 8bda_mini_wutsch_210x148.indd 8 31.10.2023 10:33:0131.10.2023 10:33:01
To Previous Page
Loading...