Mini CLUBMAN User Manual

if needed. The selector lever automati-
cally returns to the center position when
released.
Engaging selector lever position P
Press button P.
Rolling or pushing the vehicle
General information
In some situations, the vehicle is to roll
without its own power for a short distance,
for instance in a vehicle wash, or be pushed.
Engaging selector lever position N:
with a latching selector lever
1. Switch on the ignition.
2. If necessary, release the parking brake.
3. Depress the brake pedal.
4. Touch the selector lever lock and en-
gage selector lever position N.
5. Release brake.
The vehicle can roll.
If there is a malfunction, you may not be
able to change the selector lever position.
Manually unlock the transmission lock, if
needed, refer to page 118.
Engaging selector lever position N:
with a tap-operated selector lever
1. Start the engine while pressing on the
brake pedal.
2. If necessary, release the parking brake.
3. Depress the brake pedal.
4. Touch the selector lever lock and en-
gage selector lever position N.
5. Switch the engine off.
In this way, the ignition remains
switched on, and a Check-Control mes-
sage is displayed.
The vehicle can roll.
NOTICE
Selector lever position P is automatically
engaged when the ignition is switched off.
There is a risk of damage to property. Do
not switch ignition off in vehicle washes.
Irrespective of the ignition, the selector
lever position P is automatically engaged af-
ter approx. 15 minutes.
If there is a malfunction, you may not be
able to change the selector lever position.
Electronically unlock the transmission lock,
if needed, refer to page 118.
Kickdown
Kickdown is used to achieve maximum driv-
ing performance. Step on the accelerator
pedal beyond the resistance point at the full
throttle position.
Seite 115
Driving CONTROLS
115
Online Edition for Part no. 01402666575 - VI/19

Mini CLUBMAN Specifications

General

Brand	Mini
Model	CLUBMAN
Category	Automobile
Language	English