– In the event of incorrect detection by
the camera.
– When passing buses or trucks with a
speed sticker.
– If the traffic signs are non-conforming.
– When signs that are valid for a parallel
road are detected.
– During calibration of the camera imme-
diately after vehicle delivery.
Selection lists
General information
Depending on the vehicle equipment, the
buttons on the steering wheel and the dis-
play in the instrument cluster can be used
to display or use the following:
– Current audio source.
– Phone redial.
– Turn on voice activation system.
Activating a list and adjusting the
setting
Button on the
steering wheel
Function
Move selection up.
Move selection
down.
Display
Onboard Computer
Concept
The Onboard Computer displays different
vehicle data in the instrument cluster, such
as average values.
Calling up information on the Info
Display
Press the button on the turn signal lever.
Information is displayed in the Info Display
of the instrument cluster.
Seite 130
CONTROLS Displays
130
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
