Park assistance button
Camera
The camera lens is located between the li-
cense plate lights.
The image quality may be impaired by dirt.
If necessary, clean the camera lens.
Switching on/off
Switching on automatically
The system is switched on automatically if
selector lever position R is engaged when
the engine is running.
Automatic deactivation during
forward travel
The system switches off when a certain
driving distance or speed is exceeded.
Switch the system back on, if needed.
Depending on the vehicle equipment:
switching on/off manually
Press the park assistance button.
– On: the LED lights up.
– Off: the LED goes out.
The parking assistance functions are shown
on the Control Display.
Switching the view via the Central
Information Display (CID)
If the rearview camera view is not dis-
played, change the view via the Central In-
formation Display (CID):
"Rear view camera"
The rearview camera image is displayed.
Display on the Control Display
Functional requirement
– The rearview camera is switched on.
– Split doors are completely closed.
– Keep the recording range of the camera
clear.
Protruding cargo or carrier systems and
trailers that are not connected to a
trailer power socket can lead to malfunc-
tions.
Activating assistance functions
More than one assistance function can be
active at the same time.
– Parking aid lines
"Parking aid lines"
Lanes and turning radius lines are indi-
cated.
– Obstacle marking
"Obstacle marking"
Obstacles are marked, depending on the
vehicle equipment.
Seite 180
CONTROLS Driving comfort
180
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
