If the windows fog over, switch off recircu-
lated-air mode and increase the air flow, if
needed.
Controlling the air flow manually
Concept
The air flow for climate control can be ad-
justed manually.
Operation
Turn the ring to set the de-
sired air flow.
The higher the air flow, the
more effective the heating or
cooling will be.
The air flow from the air conditioner may be
reduced automatically to save battery
power.
Controlling the air distribution
manually
Concept
The air distribution for climate control can
be adjusted manually.
Operation
Turn the wheel to select the
desired program or the desired
intermediate setting.
– Windows.
– Upper body region.
– Floor area.
– Windows, upper body region, and
floor area.
To defrost windows and remove
condensation
Make the following settings to defrost the
windows and remove condensation:
– Direct the air distribution onto the win-
dows.
– Increasing the air flow.
– Increase the temperature.
– Switch on the air conditioning if needed.
Windshield defroster
Press the button. The LED lights up.
The front window defroster
switches off automatically after a certain
period of time.
Rear window defroster
Press the button. The LED lights up.
The rear window defroster switches
off automatically after a certain period of
time.
When GREEN Mode is activated, the heat-
ing output is reduced.
Microfilter
In external and recirculated-air mode, the
microfilter filters dust and pollen from the
air.
Have this filter changed during vehicle
maintenance, refer to page 289.
Seite 189
Climate control CONTROLS
189
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
