Deleting stored functions
All stored functions will be deleted. The
functions cannot be deleted individually.
Press and hold the two outer buttons on the
interior mirror simultaneously for approxi-
mately 10 seconds until the LED on the in-
terior mirror flashes green rapidly.
Digital compass
Overview
1 Control button
2 Mirror display
Mirror display
The point of the compass is displayed in the
mirror when driving straight.
Operating concept
Various functions can be called up by press-
ing the control button with a pointed object,
such as the tip of a ballpoint pen or similar
object. The following setting options are
displayed in succession, depending on how
long the control button is pressed:
– Pressed briefly: turns display on/off.
– 3 to 6 seconds: compass zone setting.
– 6 to 9 seconds: compass calibration.
– 9 to 12 seconds: left/right-hand steering
setting.
– 12 to 15 seconds: language setting.
Setting the compass zones
Sets the particular compass zones on the ve-
hicle so that the compass operates correctly;
refer to World map with compass zones.
Seite 199
Interior equipment CONTROLS
199
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
