Adjusting the steering wheel
In four directions
1. Fold the lever down.
2. Move the steering wheel to the prefer-
red height and angle to suit your seating
position.
3. Fold the lever back up.
Memory function
Concept
The following settings can be stored and, if
necessary, retrieved using the memory
function:
– Seat position.
– Exterior mirror position.
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press the button. The LED in the
button lights up.
4. Press the desired button 1 or 2 on the
seat while the LED is illuminated. The
LED goes out.
Calling up settings
The stored position is called up automati-
cally.
Press the desired button 1 or 2.
The procedure stops when a seat adjust-
ment switch or one of the memory buttons
is pressed.
Once underway, adjustment of the seat po-
sition on the driver's side is disabled after a
short while.
Infotainment
Radio
Control elements
1 Changing the waveband
2 Changing the entertainment source
3 Sound output on/off, volume
4 Changing the station/track
5 Programmable memory buttons
Pairing the mobile phone
After the mobile phone is paired once with
the vehicle, the mobile phone can be oper-
ated using the Central Information Display
(CID), the steering wheel buttons and spo-
ken instructions.
1. "My MINI"
2. "System settings"
3. "Mobile devices"
4. "Connect new device"
The vehicle's Bluetooth name is dis-
played on the Control Display.
Seite 25
Set-up and use QUICK REFERENCE
25
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
