Fold down
– To fold down: press the button, arrow 1,
and press down the head restraint, ar-
row 2.
– Forward: fold the head restraint toward
the front as far as it will go. Make sure
that the head restraint engages cor-
rectly.
Removing
Only remove the head restraint if no one
will be sitting in the seat in question.
1. Fold down the rear seat backrest, refer
to page 211, in question.
2. Pull head restraint up against the resist-
ance.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Memory function
Concept
The following settings can be stored and, if
necessary, retrieved using the memory
function:
– Seat position.
– Exterior mirror position.
General information
Different settings can be assigned to two
memory locations.
The adjustment of the lumbar support is not
stored.
Safety information
Warning
There is a risk of jamming when moving
the seats. There is a risk of injury or risk
of damage to property. Make sure that the
area of movement of the seat is clear prior
to any adjustment.
Warning
Using the memory function while driving
can lead to unexpected movements of the
seat. Vehicle control could be lost. There is
a risk of accident. Only retrieve the mem-
ory function when the vehicle is station-
ary.
Seite 86
CONTROLS Seats, mirrors, and steering wheel
86
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
