Adjusting electrically
Press the button.
The mirror movement follows the
button movement.
Malfunction
In case of an electrical malfunction, adjust
the mirror by pressing the edges of the mir-
ror glass.
Folding in and out
NOTICE
Depending on the vehicle width, the vehi-
cle can be damaged in vehicle washes.
There is a risk of damage to property. Be-
fore washing, fold in the mirrors by hand
or with the button.
Press the button.
Folding is only possible up to a speed of ap-
prox. 15 mph/20 km/h.
Folding the mirrors in and out is helpful in
the following situations:
– In vehicle washes.
– On narrow roads.
Mirrors that were folded in are folded out
automatically at a speed of approx.
25 mph/40 km/h.
Automatic heating
Both exterior mirrors are automatically
heated as needed and when the ignition is
switched on.
Automatic dimming feature
The exterior mirror on the driver's side is
automatically dimmed. Photocells in the
car's interior mirror, refer to page 89, are
used to control this.
Automatic Curb Monitor, exterior
mirror
Concept
If reverse gear is engaged, the mirror glass
on the front passenger side is tilted down-
ward. This improves your view of the curb
and other formatting issue - low-lying ob-
stacles when parking, for instance.
Activating
1. slide the switch to the driver's
side mirror position.
2. Engage selector lever position R.
Deactivating
Slide the switch to the passenger's side mir-
ror position.
Interior mirror, manually dimmable
Flip lever
To reduce the blinding effect of the interior
mirror, flip the lever forward.
Seite 88
CONTROLS Seats, mirrors, and steering wheel
88
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
