Mini Convertible Cooper - Page 123

Speed warning
Concept
A speed limit can be set that when reached
will cause a warning to be issued.
General information
The warning is repeated if the vehicle speed
exceeds the set speed limit again, after it
has dropped below it by 3 mph/5 km/h.
Adjusting
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Speed warning"
4. "Warning at:"
5. Turn the Controller until the desired
speed is displayed.
6. Press the Controller.
Activating/deactivating
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Speed warning"
4. "Speed warning"
Setting your current speed as the
speed warning
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Speed warning"
4. "Select current speed"
LED ring on the central in-
strument cluster
Concept
The LED ring displays light animations to
represent specific functions.
Basic displays
Basic functions, for instance the tachome-
ter, can be set to be displayed continually if
so desired.
Event displays
Functions that are only displayed tempora-
rily, for instance the volume or temperature
settings, can be set as event displays.
Several vehicle assistance functions can
also be displayed on the LED ring. This dis-
play corresponds with the displays of the
function in the respective display.
Example: tachometer
Like the tachometer in the instrument clus-
ter, the light animations of the tachometer's
basic display show the current RPMs and
the respective RPM warning thresholds.
Display
– Arrow 1: current RPM.
– Arrow 2: prewarning field.
– Arrow 3: warning field.
Seite 123
Displays CONTROLS
123
Online Edition for Part no. 01405A02757 - II/20