– Arrow 3: reversing light
6. Proceed in the reverse order to insert
the new bulb and attach the bulb holder.
Make sure that the bulb holder engages
in all fasteners.
With Union Jack
Follow the general instructions on lights
and bulbs, refer to page 277.
Bulb, reversing lights: P21W.
1. Opening trunk lid.
2. Remove left or right cover.
3. Turn the bulb holder for the reversing
light, arrow, counterclockwise and re-
move it.
4. Remove the bulb holder from the open-
ing.
5. Press the nonworking bulb gently into
the socket, turn counterclockwise and
remove.
6. Proceed in the reverse order to insert
the new bulb and attach the bulb holder.
Make sure that the bulb holder engages
in all fasteners.
Central brake light and license plate
lights
Follow the general instructions on lights
and bulbs, refer to page 277.
The lights feature LED technology. In the
case of a malfunction, contact a dealer's
service center or another qualified service
center or repair shop.
Side turn signal, bulb replacement
Follow the general instructions on lights
and bulbs, refer to page 277.
Bulbs:
Seite 281
Replacing components MOBILITY
281
Online Edition for Part no. 01405A02757 - II/20
To Next Page
Loading...
