Follow the information in the Check Control
message.
The indicator light flashes and is then illu-
minated continuously: flat tires or tire pres-
sure losses cannot be detected.
– Interference caused by systems or devi-
ces with the same radio frequency: after
leaving the area of the interference, the
system automatically becomes active
again.
– TPM was unable to complete the reset.
Reset the system again.
– A wheel without TPM wheel electronics
is mounted: have it checked by a deal-
er’s service center or another qualified
service center or repair shop as needed.
– Malfunction: have the system checked
by a dealer’s service center or another
qualified service center or repair shop.
Tire Pressure Monitor, refer to page 145.
Steering system
Steering system may not be working.
Have the system checked by a deal-
er's service center or another quali-
fied service center or repair shop.
Acoustic pedestrian protection inactive
Acoustic pedestrian protection de-
fective.
Have the system checked by a deal-
er's service center or another qualified serv-
ice center or repair shop.
Green lights
Turn signal
Turn signal switched on.
Unusually rapid flashing of the indi-
cator light indicates that a turn sig-
nal bulb has failed.
Turn signal, refer to page 109.
Parking lights, headlight
Parking lights or headlights are
switched on.
Parking lights/low beams, headlight
control, refer to page 135.
Front fog lights
Front fog lights are switched on.
Front fog lights, refer to page 138.
High-beam Assistant
High-beam Assistant is switched on.
High beams are switched on and off
automatically depending on the traf-
fic situation.
High-beam Assistant, refer to page 137.
Cruise control
The system is switched on. It main-
tains the speed that was set using
the control elements on the steering
wheel.
Blue lights
High beams
High beams are switched on.
High beams, refer to page 109.
Seite 123
Displays CONTROLS
123
Online Edition for Part no. 01405A02680 - II/20
To Next Page
Loading...
