excess pressure to dissipate, then open
it.
4. Open the coolant reservoir lid.
5. The coolant level is correct if it lies be-
tween the minimum and maximum
marks in the filler neck.
6. Close the lid.
When the coolant level is low, check the
cooling system and add coolant. Have the
cooling system checked and coolant added
by a dealer’s service center or another
qualified service center or repair shop.
Disposal
Comply with the relevant environ-
mental protection regulations when
disposing of coolant and coolant ad-
ditives.
Seite 247
Coolant MOBILITY
247
Online Edition for Part no. 01405A02680 - II/20
To Next Page
Loading...
Need help?
General
