Changing color
Push the switch forward or back:
manual color change.
Press the switch forward or backward
and hold for approx. 3 seconds, until
the ambient light illuminates several times: au‐
tomatic color change. Push the switch again to
end color changes.
Setting the brightness
Depending on the equipment, the brightness of
the ambient light can be adjusted via the
thumbwheel for the instrument lighting or on
the Control Display.
Via the Central Information Display (CID):
1.
"Settings"
2. "Lighting"
3. "Brightness:"
4. Adjust the brightness.
Seite 114
CONTROLS
Lights
114
Online Edition for Part no. 01402983336 - X/17
To Next Page
Loading...
