movement of the rear backrest and the of the
head restraint is clear prior to folding down.◀
WARNING
If a rear seat backrest is not locked, unse‐
cured cargo can be thrown into the car's inte‐
rior; for instance, in the event of an accident,
braking or an evasive maneuver. There is a risk
of injury. Make sure that the rear seat backrest
is locked after folding it back.◀
WARNING
With a rear backrest that is not locked,
the protective function of the middle safety belt
is not guaranteed. There is a risk of injuries or
danger to life. If you are using the middle safety
belt, lock the wider rear seat backrest.◀
WARNING
The stability of the child restraint system
is limited or compromised with incorrect seat
adjustment or improper installation of the child
seat. There is a risk of injuries or danger to life.
Make sure that the child restraint system fits
securely against the backrest. If possible, adjust
the backrest tilt for all affected backrests and
correctly adjust the seats. Make sure that seats
and backrests are securely engaged or locked.
If possible, adjust the height of the head re‐
straints or remove them.◀
WARNING
Body parts can be jammed when moving
the head restraint. There is a risk of injury.
Make sure that the area of movement is clear
when moving the head restraint.◀
Folding down the rear seat backrest
from the rear
1.
Before the rear seat backrest is folded
down, hook the corresponding safety belt
into the belt buckle on the side.
2. Pull the lever up, arrow 1, and fold the rear
seat backrest forward, arrow 2.
Cargo position
Concept
The rear seat backrests can be moved into an
upright loading position.
Settings
1.
Release the backrest, and tilt it forward.
2. Fold the frame up until it engages.
3. Fold back and engage the rear seat back‐
rest.
Fold back the backrest
Fold up the backrest and press it into the latch.
Make sure that the safety belt is not pinched.
Seite 178
CONTROLS
Cargo area
178
Online Edition for Part no. 01402983336 - X/17
To Next Page
Loading...
Need help?
General
