Parking brake
Safety information
WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acci‐
dent. Before exiting, secure the vehicle against
rolling.
In order to ensure that the vehicle is secured
against rolling away, follow the following:
▷ Set the parking brake.
▷ On uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.
▷ On uphill grades or on a downhill slope,
also secure the vehicle, for instance with a
wheel chock.◀
Applying
The lever automatically engages after being
pulled up.
The indicator light lights up red. The
parking brake is set.
Lower light: indicator light in Canadian
models
If for once use during driving is required, en‐
gage the parking brake slightly and hold the
button down.
To prevent corrosion and one-sided brake ac‐
tion, lightly apply the parking brake periodically
while coasting, if traffic conditions permit.
The brake lights will not light up if the parking
brake is set.
Releasing
Raise lever slightly, press the button and guide
the lever down.
Turn signal, high beams,
headlight flasher
Turn signal
Using turn signals
Press the lever past the resistance point.
Canada: the lever returns into its starting posi‐
tion after actuation. To switch off manually,
slightly tap the lever to the resistance point.
Triple turn signal activation
Lightly tap the lever up or down.
The turn signal flashes three times.
The function can be activated or deactivated.
Via the Central Information Display (CID):
1.
"Settings"
2. "Lighting"
Seite 74
CONTROLS
Driving
74
Online Edition for Part no. 01402983336 - X/17
To Next Page
Loading...
Need help?
General
