Controls overview
58
Exiting displays
1. Briefly press the button in the turn signal
lever repeatedly until "HOME" is displayed.
2. Press the button for a longer period.
The outside temperature is once again dis-
played.
Displays are also exited if no entries are made
for approx. 8 seconds.
Next setting or item of information
1. While in a setting or information item, briefly
press the button in the turn signal lever
repeatedly until "NEXT" is displayed.
2. Press the button for a longer period.
The display changes directly to the next setting
or item of information.
Units of measure
To set the units of measure. The settings are
stored for the remote control currently in use,
refer also to Personal Profile on page 26.
1. "Settings"
2. "Language/Units"
3. Select the desired menu item.
4. Select the desired unit.
Symbol Function
Adjusting rain
sensor
* 51
Calling up Check
Control 62
Displaying vehicle
check 63
Exiting the menu
ba8_r60.book Seite 58 Mittwoch, 6. Oktober 2010 9:27 09
Online Edition for Part no. 01 40 2 606 303 - © 10/10 BMW AG
To Next Page
Loading...
