Symbols
Symbols Description
No servicing is currently
needed.
Maintenance or an inspec-
tion required by law is due
soon.
Servicing is overdue.
Entering deadlines
Enter deadlines for prescribed statutory ve-
hicle inspections.
Ensure that the date and time are set cor-
rectly in the vehicle.
Using the on-board monitor:
1. "My MINI"
2. "Vehicle status"
3. "Service requirements"
4. "Vehicle inspection"
5. "Date:"
6. Select the desired setting.
Automatic Service notification
Data on the service status or on statutory
inspections for the vehicle is transmitted to
the Service Partner automatically when a
service or inspection is imminent.
It is possible to check when the Service
Partner was notified.
Using the on-board monitor:
1. "My MINI"
2. "Vehicle status"
3. "Teleservice Call"
Service history
Principle
Maintenance that has been performed can
be displayed on the Control Display. This
function is available as soon as a mainte-
nance visit has been entered in the vehicle
data.
General
Have maintenance work performed by a
Service Partner of the manufacturer or an-
other qualified Service Partner or a special-
ist workshop. The maintenance work car-
ried out is documented in the vehicle data.
Displaying service history
Using the on-board monitor:
1. "My MINI"
2. "Vehicle status"
3. "Service requirements"
4. "Service history"
Performed maintenance is shown.
5. Select an entry to display more detailed
information.
Symbols
Symbols Description
Green: maintenance has
been carried out on time.
Yellow: maintenance has
been carried out later than
scheduled.
Maintenance has not been
carried out.
Seite 132
CONTROLS Displays
132
Online Edition for Part no. 01402988211 - II/18
To Next Page
Loading...
