Switching on
Using the on-board monitor:
1. "My MINI"
2. "System settings"
3. "Displays"
4. "Head-up display"
5. "Information displayed"
6. "Sport displays"
Display
1 Speed
2 Shift Lights
3 Gear display
4 Current engine speed
5 Warning zone, engine speed
Shift Lights
Principle
In the Head-Up Display, Shift Lights show
the optimum moment to shift. In this way,
the best possible vehicle acceleration is
achieved when adopting a dynamic driving
style.
Operating requirements
– Steptronic sport transmission:
Manual operation M/S and possibly Dy-
namic Traction Control DTC are activa-
ted.
– Fully depress the accelerator pedal.
Display
Grey fields illuminating successively indi-
cate when an gearshift is due.
As soon as the red fields illuminate, shift up
immediately.
When the maximum permissible engine
speed is reached, the entire display flashes
and the fuel supply is limited to protect the
engine.
Vehicle status
General
The status can be displayed or actions per-
formed for some systems.
Calling up the vehicle status
Using the on-board monitor:
1. "My MINI"
2. "Vehicle status"
Overview of the information
– "Flat Tyre Monitor": status of the
runflat indicator, see page 157.
– "Tyre Pressure Monitor": status of
the Tyre Pressure Monitor, see
page 152.
– "Engine oil level": electronic oil
level check, see page 296.
– "Check Control": Check Control mes-
sages are stored in the background and
can be shown on the Control Display.
Displaying of saved Check Control mes-
sages, see page 128.
– "Service requirements": display of
the service requirements, see page 131.
– "Teleservice Call": Teleservice Call.
Seite 140
CONTROLS Displays
140
Online Edition for Part no. 01402988211 - II/18
To Next Page
Loading...
