Overview
Depending on the equipment installed:
button in the vehicle
Park Assistant button
Camera
The lens of the camera is located in the han-
dle strip of the tailgate.
Dirt can impair the quality of the image.
Clean the camera lens if required.
Switching on/off
Switching on automatically
The system is automatically switched on if
selector lever position R is engaged while
the engine is running.
Automatic switching off when moving
forwards
The system switches off when a certain dis-
tance or speed is exceeded.
Switch the system back on if necessary.
Depending on the equipment installed:
switching on/off manually
Press the Park Assistant button.
– On: the LED is illuminated.
– Off: the LED is extinguished.
The parking assistance functions are shown
on the Control Display.
Changing the view on the on-board
monitor
If the rear-view camera view is not dis-
played, change the view via the on-board
monitor:
"Rear view camera"
The image from the rearview camera is
shown.
Display on the Control Display
Operating requirements
– The rearview camera is switched on.
– The tailgate is completely closed.
– Keep the detection area of the camera
clear. Projecting loads or carrier systems
and trailers that are not connected to a
trailer socket can lead to malfunctions.
Activating assistance functions
A number of assistance functions can be ac-
tive simultaneously.
The zoom function for towing a trailer can
only be activated individually.
– Parking aid lines
"Parking guidance lines"
Driving path lines and turning circle
lines are shown.
– Obstacle marking
"Obstacle marking"
Seite 188
CONTROLS Driving comfort
188
Online Edition for Part no. 01402988211 - II/18
To Next Page
Loading...
