Backrest angle
Tilt the switch forwards or backwards.
Lumbar support
Principle
The curvature of the backrest can be
changed in such a way that the lumbar re-
gion, the lordosis, is supported. The upper
edge of the pelvis and the spinal column are
supported to encourage an upright posture.
To adjust
– Press the button at the
front/rear:
The curvature is in-
creased/decreased.
– Press the button at the
top/bottom:
The curvature is shifted
upwards/downwards.
Thigh support
Pull the lever on the front of the seat and
adjust the thigh support.
Seat heating, front
Overview
Seat heating
Switching on
Press the button once for each tem-
perature level.
The maximum temperature is selected if the
three LEDs are illuminated.
If the journey is continued within about
15 minutes after a temporary stop, the seat
heating is automatically activated with the
last temperature set.
If GREEN Mode is activated, see page 238,
the heating power is reduced.
Seite 80
CONTROLS Seats, mirrors and steering wheel
80
Online Edition for Part no. 01402988211 - II/18
To Next Page
Loading...
