4. Insert the pulling hook 1 from the onboard
vehicle tool kit into the loop on the passen‐
ger side.
5. Pull the loop upward.
6. Move the selector lever into the desired po‐
sition, pressing the button on the front of
the selector lever.
Set the handbrake
Before manually unlocking the selector
lever lock, pull the handbrake firmly; otherwise,
the vehicle may roll away and cause personal
injury or property damage.◀
Seite 73
Driving
Controls
73
Online Edition for Part no. 01 40 2 919 017 - II/13
To Next Page
Loading...
