– Resting position of the wipers, posi-
tion 0.
– Intermittent operation or rain sensor,
position 1.
– Normal wiper speed, position 2.
– Fast wiper speed, position 3.
When travel is interrupted with the wiper
system switched on: when travel continues,
the wipers resume at their previous speed.
Switching off and brief wipe
Press the lever down.
– Switching off: press the lever down until
it reaches its standard position.
– Brief wipe: press the lever down from
the standard position.
The lever automatically returns to its in-
itial position when released.
Interval mode or rain sensor
Concept
The rain sensor automatically controls the
time between wipes depending on the in-
tensity of the rainfall.
General information
The sensor is located on the windshield, di-
rectly in front of the interior mirror. With-
out the rain sensor, the frequency of the
wiper operation is preset.
Safety information
NOTICE
If the rain sensor is activated, the wipers
can accidentally start moving in vehicle
washes. There is a risk of damage to prop-
erty. Deactivate the rain sensor in vehicle
washes.
Activating
Press the lever up once from its standard
position, arrow 1.
Wiping is started.
The LED in the wiper lever is illuminated.
In frosty conditions, wiper operation may
not start.
Deactivating
Press the lever back into the standard posi-
tion.
Seite 106
CONTROLS Driving
106
Online Edition for Part no. 01405A1E4E3 - II/20
To Next Page
Loading...
Need help?
General
