The conditions are not adequate for the sys-
tem to work.
The system was deactivated but applies the
brakes until you actively resume control by
pressing on the brake pedal or accelerator
pedal.
Symbol flashes red and a signal
sounds:
Brake and make an evasive maneu-
ver, if necessary.
System interrupted without detected
vehicle.
System interrupted with detected ve-
hicle.
Displays in the Head-up Display
The information from Active Cruise Control
can also be displayed in the Head-up Dis-
play.
System limits
Detection range
The detection capacity of the system and
the automatic braking capacity are limited.
Two-wheeled vehicles for instance might
not be detected.
Deceleration
The system does not decelerate in the fol-
lowing situations:
– For pedestrians, cyclists or similarly
slow-moving road users.
– For red traffic lights.
– For cross traffic.
– For oncoming traffic.
– Unlit vehicles or vehicles with nonwork-
ing lighting at night.
Swerving vehicles
A vehicle driving in front of you is not de-
tected until it is completely within the same
lane as your vehicle.
If a vehicle driving ahead of you suddenly
swerves into your lane, the system may not
be able to automatically restore the selected
distance. It may not be possible to restore
the selected distance in certain situations,
including if you are driving significantly
faster than vehicles driving ahead of you,
for instance when rapidly approaching a
truck. When a vehicle driving ahead of you
is reliably detected, the system requests
that the driver intervene by braking and
carrying out evasive maneuvers, if needed.
Seite 183
Driving comfort CONTROLS
183
Online Edition for Part no. 01405A1E4E3 - II/20
To Next Page
Loading...
Need help?
General
