have the TPM wheel electronics re-
placed at the next opportunity.
– The compressor can be used to check
the tire inflation pressure.
Overview
Storage
The Mobility System is located under the
cargo floor panel.
Sealant container
– Sealant container, arrow 1.
– Filling hose, arrow 2.
Observe use-by date on the sealant con-
tainer.
Compressor
1 Sealant container unlocking
2 Sealant container holder
3 Tire pressure gage
4 Reduce tire inflation pressure button
5 On/off switch
6 Compressor
7 Connector/cable for socket
8 Connection hose
Safety measures
– Park the vehicle as far away as possible
from passing traffic and on solid ground.
– Switch on the hazard warning system.
– Secure the vehicle against rolling away
by setting the parking brake.
– Turn the steering wheel until the front
wheels are in the straight-ahead posi-
tion and engage the steering wheel lock.
– Have all vehicle occupants get out of the
vehicle and ensure that they remain out-
side the immediate area in a safe place,
such as behind a guardrail.
– If necessary, set up a warning triangle
at an appropriate distance.
Filling the tire with sealant
Safety information
DANGER
If the exhaust pipe is blocked or ventila-
tion is insufficient, harmful exhaust gases
can enter into the vehicle. The exhaust
gases contain pollutants which are color-
less and odorless. In enclosed areas, ex-
haust gases can also accumulate outside of
the vehicle. There is danger to life. Keep
the exhaust pipe free and ensure sufficient
ventilation.
NOTICE
The compressor can overheat during ex-
tended operation. There is a risk of dam-
age to property. Do not run the compres-
sor for more than 10 minutes.
Seite 262
MOBILITY Wheels and tires
262
Online Edition for Part no. 01405A1E4E3 - II/20
To Next Page
Loading...
Need help?
General
