– Do not hang objects, for instance
clothes hangers, directly on the head
restraint.
– Only use accessories that have been
determined to be safe for attachment
to a head restraint.
– Do not use any accessories, for in-
stance pillows, while driving.
Adjusting the height
– To lower: press the button, arrow 1, and
push the head restraint down.
– To raise: push the head restraint up.
After setting the height, make sure that the
head restraint engages correctly.
Fold down
– To fold down: press the button, arrow 1,
and press down the head restraint, ar-
row 2.
– Forward: fold the head restraint toward
the front as far as it will go. Make sure
that the head restraint engages cor-
rectly.
Removing
Only remove the head restraint if no one
will be sitting in the seat in question.
1. Fold down the rear seat backrest, refer
to page 226, in question.
2. Pull head restraint up against the resist-
ance.
3. Press the button, arrow 1, and pull the
head restraint out completely.
Installing
Proceed in the reverse order to install the
head restraint.
Mirrors
Exterior mirrors
General information
The mirror on the front passenger side is
more curved than the driver's side mirror.
Seite 88
CONTROLS Seats, mirrors, and steering wheel
88
Online Edition for Part no. 01405A1E4E3 - II/20
To Next Page
Loading...
Need help?
General
