Instrument lighting
Functional requirement
The parking lights or low beams must be
switched on to adjust the brightness.
Adjusting
Adjust the brightness with the
thumbwheel.
Interior lights
General information
Depending on the equipment, the interior
lights, footwell lights, entry lights, and cour-
tesy lights are controlled automatically.
The thumbwheel for the instrument lighting
controls brightness of some of these fea-
tures.
Overview
1 Interior lights
2 Reading lights
3 Ambient light
Switching the interior lights on/off
Press the button.
To switch off permanently: press the button
and hold for approx. 3 seconds.
Switching the reading lights on and
off manually
Press the button.
The reading lights are located in the front
next to the interior light.
Ambient light
General information
Depending on the equipment version, light-
ing can be adjusted for some lights in the
car's interior.
Changing color
Push the switch forward or back:
manual color change.
Press the switch forward or back-
ward and hold for approx. 3 seconds,
until the ambient light illuminates
several times: automatic color change. Push
the switch again to end color changes.
Setting the brightness
Depending on the equipment, the bright-
ness of the ambient light can be adjusted
via the thumbwheel for the instrument
lighting or on the Control Display.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Lighting"
4. "Interior lighting"
Seite 140
CONTROLS Lights
140
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
