Mini Saloon User Manual

Variable cargo area floor
Concept
With the variable cargo area floor, the cargo
area can be configured corresponding to
transport requirements.
General information
Follow instructions on securing cargo, refer
to page 208.
Removing the cargo floor panel
1. Fold the rear part of the cargo floor
panel upward.
2. Grasp the cargo floor panel in the rear
and fold slightly upward.
3. Pull the cargo floor panel backward from
the brackets.
Proceed in the reverse order to reinstall the
cargo area floor.
Folded up position
Safety information
Warning
Improper use of the variable cargo floor
panel can lead to a danger of objects flying
about during braking and evasive maneu-
vers. There is a risk of injury and risk of
damage to property.
– Do not use the variable cargo floor
panel to separate the cargo area and
car's interior in the sense of a parti-
tion net.
– Only use the variable cargo floor
panel in the folded-up position when
the backrests are folded up and
locked.
– Fold down the variable cargo floor
panel before driving off.
– Always secure cargo against shifting,
using straps, belts and lashing eyes,
for instance.
Fold up the cargo floor panel
Fold the rear part of the cargo floor panel
upward.
Fold up the cargo floor panel and press be-
hind the locks on the left and right, arrow.
You've reached the maximum cargo height.
Seite 213
Cargo area CONTROLS
213
Online Edition for Part no. 01402666575 - VI/19

Mini Saloon Specifications

General

Brand	Mini
Model	Saloon
Category	Automobile
Language	English