5. The coolant level is correct if it lies be-
tween the minimum and maximum
marks in the filler neck.
6. Close the lid.
Adding
1. Let the engine cool.
2. Open the hood, refer to page 281.
3. Turn the lid of the coolant reservoir
slightly counterclockwise to allow any
excess pressure to dissipate, then open
it.
4. Open the coolant reservoir lid.
5. If the coolant is low, slowly add coolant
up to the specified level; do not overfill.
6. Close the lid.
7. Have the cause of the coolant loss elimi-
nated as soon as possible.
Disposal
Comply with the relevant environ-
mental protection regulations when
disposing of coolant and coolant ad-
ditives.
Seite 288
MOBILITY Coolant
288
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
