7. Turn the bulb holder counter-clockwise
and remove nonworking bulb.
8. To insert the new bulb and install the
tail light, proceed in reverse order of re-
moval. Make sure that the bulb holder
sits tight in the tail light.
Central brake light and license plate
lights
Follow the general instructions on lights
and bulbs, refer to page 292.
The lights feature LED technology. In the
case of a malfunction, contact a dealer's
service center or another qualified service
center or repair shop.
Side turn signal, bulb replacement
Follow the general instructions on lights
and bulbs, refer to page 292.
Bulbs:
– With white lens: WY5W.
1. Open the hood. The covers of the side
turn signal lights are on the left and
right next to the hinges of the hood.
2. Loosen nuts of the cover by hand and re-
move the cover.
3. Turn the bulb socket counterclockwise
and remove.
4. Replace the bulb.
5. To insert the new bulb, proceed in re-
verse order of removal. Insert the nuts
of the cover and press down.
Seite 298
MOBILITY Replacing components
298
Online Edition for Part no. 01402666575 - VI/19
To Next Page
Loading...
Need help?
General
