16
NOTE 1:
If you wish to temporarily interrupt the heating process, push the power button
(13).
To restart the process, push the same button again.
If, however, you wish to terminate the heating process completely before the time
indicated runs out, keep the power button (13) pushed down for four seconds.
8. Once the heating process has been completed, the device will beep and the process
status indicator (15) will turn itself off to notify the user.
9. Taking the relevant precautions to avoid burns, remove the receptacle and check the
temperature of the product before giving it to your baby.
HEATING OF BABY BOTTLES AND FOOD JARS
Heating table for plastic bottles
VOLUME IN THE
BABY BOTTLE
INITIAL
TEMPERATURE OF
THE CONTENT
WATER IN THE
HEATER
HEATING TIME
90ml
20ºC 20ml 3’
4ºC 30ml 5’
120ml
20ºC 20ml 3’
4ºC 35ml 5’
150ml
20ºC 20ml 3’
4ºC 35ml 6’
180ml
20ºC 20ml 3’
4ºC 35ml 6’
210ml
20ºC 25ml 4’
4ºC 40ml 6’
240ml
20ºC 25ml 4’
4ºC 40ml 7’
270ml
20ºC 30ml 5’
4ºC 40ml 7’
300ml
20ºC 30ml 5’
4ºC 45ml 8’
330ml
20ºC 30ml 5’
4ºC 45ml 8’
ENGLISH
To Next Page
Loading...
