To Next PageTo Next Page
Need help?Do you have a question about the MiniMax MM 16 and is the answer not in the manual?
Covers options for machine delivery, pickup, and initial handling.
Details how to inspect the saw for shipping damage and remove packaging.
Instructions for cleaning the bandsaw, including specific advice for plastic parts.
Explains the dust port size and required airflow for effective dust collection.
Details how to inspect and adjust the lower guide assemblies for proper blade alignment.
Covers the process of aligning and adjusting the upper guide assemblies.
Explains how to properly tension a bandsaw blade using the provided gauge.
How to ensure the blade is square to the table surface in the side-to-side plane.
Adjusting the table to be square to the blade in the front-to-back direction.
Step-by-step guide to making the upper and lower wheels coplanar for better blade support.
Instructions on how to tilt the bandsaw table for angled cuts.
Advice on miter gauge binding and slot adjustment, noting limited use.
How to adjust the fence to compensate for blade drift during cuts.
Explains how to adjust the throat plate to be flush with the table surface.
Guide on choosing the right blade type and TPI for specific cutting applications.
Collection of practical tips for maintaining the bandsaw and ensuring optimal performance.
Rules for setting blade tension using the flutter test method.
Defines appropriate blade set and how to identify it by sawdust ejection.
Explains hook articulation, rake angle, and their importance for cutting performance.
General