MINIWARE TS80P - Page 18

4.4 Configuration file
1) Connect soldering iron to computer with USB Type-C cable. A virtual disk will appear on computer,
and now it enters setting mode;
2) Open config.txt file in virtual disk to set parameters.
Parameter interpretations are as follows:
Parameters Interpretations ad kee
StbTemp
nende
200
22e
Ere
sp=t)
WkTemp tn re 300 aar AE n=)
SlpTime ed 180 60-9999s
TempStp Ke 10 1-25
OffVolt En 130 100-130 (Unit 0.1V)