1918
2.Place the film cartridge into the
film chamber. Extend the film
leader to the "FILM TIP" mark,
making sure it lays flat.
• If the film tip extends beyond the index mark, push the excess film back
into the cartridge.
LOADING THE FILM
3.Close the back cover.
• The film automatically advances to the first frame
and appears on the data panel.
• If the film has been loaded improperly, will
blink on the data panel and the shutter will
remain locked. Open the back cover and repeat
the loading procedure.
• Once the film is loaded, the back cover will lock preventing accidental
opening until the film is rewound (film chamber lock).
To Next Page
Loading...
