103
Data Processor
Measurement
3
Select the color difference target color for measure-
ment using the key.
4
Press the Measure/Enter key
.
• The target color Edit/Change selection screen appears.
5
Select “CHANGE” using the key.
6
Press the Measure/Enter key
.
• Settings are complete, complete sound beeps and the display
returns to the measurement screen.
• The currently selected target color is displayed.
7
Place the measuring head vertically above the speci-
men.
8
Press the Measure/Enter key
(or measurement button on the measuring
head) after making sure the ready lamp is ON.
• Measurement is done and the data is displayed. If the printer
is set to ON on the index set screen, the data is printed out.
Do not move the measuring head during measurement.
［ＴＡＲＧＥＴ］ １／１
ＮＥＷ
Ｔ０２
Ｔ０１
Ｔ００
Ｐ００
C
P
［０００１］
［ＴＡＲＧＥＴ］
ＥＤＩＴ
ＣＨＡＮＧＥ
Ｐ００
C
P
［０００１］
Ｌ＊＝ ８９．２８
ａ＊＝ １．７９
ｂ＊＝ １４．８９
ΔＬ＊＝
Δａ＊＝
Δｂ＊＝
ΔＥ＊＝
Ｐ００
C
P
［０００１］
List screen
Selection screen
Measurement screen
(previous measurement data)
To Next Page
Loading...
