130
Data Processor
Functions
4
Press the Index Set key
Index Set
０
while in the measurement
screen.
• The index set screen appears.
5
Press the key to change to page 2/2.
6
Press the Measure/Enter key
.
• The remote mode screen appears.
• Pressing the Escape key
Esc
returns to the measurement screen.
When removing the RS-232C cable, turn OFF
the measuring head and data processor and push
the lock release button certainly while removing
the cable.
If the lock is not released and remove it by force,
the connector may be damaged.
Index set screen (2/2)
Remote mode screen
Index set screen (1/2)
To Next Page
Loading...
