Minolta CR-400 - Page 142

140
Data Processor Applications
User Calibration
4
Select the calibration channel to delete using the
key.
5
Press the Delete/Undo key

.
• The calibration data deletion selection screen will appear.
6
Select either one channel selected or “ALL CHAN-
NELS” using the key.
7
Press the Measure/Enter key

.
• The deletion screen for calibration appears.
8
Confirm the message and press the Measure/Enter key

.
• Once deletion is complete, complete sound beeps and the display returns to the measurement
screen.
White calibration is selected if the selected calibration channel is deleted.
List screen
Selection screen
［ＣＡＬＩＢ．］
◎ＤＥＬＥＴＥ


Ｃｈ０１
ＡＬＬ ＣＨＡＮＮＥＬＳ



Ｐ００ 
C  P 
［０００１］
［ＣＡＬＩＢ．］
◎ＤＥＬＥＴＥ


Ｃｈ０１
ＡＬＬ ＣＨＡＮＮＥＬＳ



Ｐ００ 
C  P 
［０００１］
［ＣＡＬＩＢ．］
◎ＤＥＬＥＴＥ

ＤＥＬＥＴＩＮＧ
Ｃｈ０１
ＯＫ？



ＥＸＥＣＵＴＥ：［Ｅｎｔｅｒ］
Ｐ００ 
C  P 
［０００１］
［ＣＡＬＩＢ．］ １／１ 
◎ＵＳＥＲ ＣＡＬＩＢ．
ＮＥＷ 
Ｃｈ０２ 
Ｃｈ０１ 




Ｐ００ 
C  P 
［０００１］
Only deleting the
selected channel