29
Measuring Head 1
Preparation
1
Press the Input key
ENTER
while the
start-up screen is displayed (approx.
2 seconds) after the power is turned
ON.
• The menu screen appears.
2
Move the cursor using the key to select the set-
ting item.
3
Press the Enter key
ENTER
to change the settings.
• Pressing the Enter key
ENTER
changes the setting values in the table above for each item.
• For 4) PC mode, pressing the Enter key
ENTER
switches to PC connection mode.
(See P.50 "Changing to PC Mode")
• Changes are confirmed once they are changed.
4
Once settings are complete, press the Escape key
ESC
.
• The display returns to the measurement screen.
LCD Display and Communication Setting
The following four items can be set in the instrument.
Setting item Description
1) Contrast
2) Back light
3) Baud rate
4) PC mode
Adjusts the contrast of the LCD. The larger
value displays darker.
Turns the LCD backlight ON and OFF. When
ON, the light comes ON for 30 seconds after
key operation and then automatically goes
OFF.
This sets the baud rate, one of the communica-
tion parameters when connecting to a PC.
This switches to the mode used for communi-
cation with a PC.
Value Default
1-2
OFF/ON
4800,9600,19200
6
OFF
9600
Operating Procedure
Start up screen
Menu screen
Menu screen
ＭＩＮＯＬＴＡ
To Next Page
Loading...
