Minolta CR-400 - Setting Status of Connected Measuring Head and Data Processor

64
Data Processor Prepation
Default
Head
C
0
None
OFF
None
None
None
XYZ
Absolute value/
color difference
See P.76
"Initial Settings"
None
Adjustment at
shipment
English
9600
OFF
Once
DP
C
−
−
−
−
−
None
XYZ
Absolute value/
color difference
See P.76
"Initial Settings"
None
Adjustment at
shipment
*English
*19200
OFF
Once
Connecting status
(The data of arrow left side overwrites
the data of arrow right side)
DP → Head
Head → DP
Head → DP
−
DP → Head
DP → Head
Head → DP
DP → Head
DP → Head
Head → DP
DP → Head
Remarkes
The DP data can overwrite the
Head data when the instrument is
initial settings.
The data is not stored in DP
(operation only)
The data is not stored in DP
(operation only)
The Head data can be transfered
to DP by optional setting
"moving data".
*
When the measuring head is
disconnected from the data
processor and used, the settings at
the time of disconnection remain.
User index only: Head → DP
(User index is not initialized by
"Initial Settings" of DP.)
If backup batteries are dead the
setteing becomes 2002/01/01
00:00
(It is not initialized by "Initial
Settings" of DP.)
*
(It is not initialized by "Initial
Settings" of DP.)
*
Baud rate of DP remote mode is
fixed at 19200.
(It is not initialized by "Initial
Settings" of DP.)
Item
Illuminant
White calibration data
User calibration Ch
Multi-calibration
Target color data
Selected color
difference target color
Mesurement data
Selected color space
Screen display
Displayed color limit
(CMC parameter)
User index
Date & time
Language
Baud rate
Protecting data
Number of measurements
for average
<Setting Status of Connected Measuring Head and Data Processor>
The common default settings and connecting status of connected measuring head and data processor
are shown as follows.
• Setting items which are not described below are not changed in spite of connecting status.
(Head: Measuring Head, DP: Data Processor)