70
Data Processor
Prepation
Setting Language Mode
The instrument allows the user to select from six language modes.
1) Japanese 2) English 3) German 4) French 5) Spanish 6) Italian
If the language settings in the measuring head and the data processor are different, the setting for the
data processor is reflected to the measuring head.
[Operating Procedure]
1
Turn the power ON ( I ) while pressing the Enter key
.
• Once selection of language is complete, the start-up screen ap-
pears.
When shipped from the factory, the language mode is set to En-
glish. If another language is selected and the internal memory
backup battery dies, the language mode will revert to English. The
memory backup battery will die if the instrument is not supplied
with power for ten months.
Language selection screen
Start-up screen
1
2
3
To Next Page
Loading...
