78
Data Processor
Prepation
Displaying Measurement Results
<Selecting the Color Space>
Using this instrument changes the color space as below.
(Color spaces) XYZ, Yxy, L*a*b*, Hunter Lab, L*C*h, Munsell (illuminant C only), CMC(l:c),
CIE1994, Lab 99, LCh99, CIE2000, CIE WI/Tw (illuminant D65 only),
WI ASTM E313 (illuminant C only), YI ASTM D1925 (illuminant C only),
YI ASTM E313 (illuminant C only)
* User index
• The displayed color space can be selected depending on the displayed color limit. (See P.72 “Basic
Setting”.)
* Up to 6 data can be displayed if a user index is registered. (See P.127 “User Index” )
See P.79 "Color Space and Changing the Display" and P.80 "Color Space and Color Difference Set-
ting" for details on the setting conditions for the color space.
[Operating Procedure]
1
Press the Color Space key
to select the color space.
• The display changes every time the key is pressed.
[Absolute value/color difference for color difference measurement (example)]
⇒⇒
⇐⇐
⇑
⇓
XYZ Yxy L*a*b*
Munsell
(illuminant C only)
L*C*h
Hunter Lab
[Setting conditions]
• The color difference target color is set.
• Absolute value/color difference display is selected
by pressing the Change Display key
５
ＪＫＬ
To Next Page
Loading...
